Rubber Maid Outdoor Shed – All Rubbermaid outdoor throws are weather resistant, leak resistant, and dent resistant, as well as the need for maintenance. Expect no oxidation, rot or other problems with a Rubbermaid shed. Each booth includes step-by-step instructions with easy-to-follow diagrams, and part names are molded into each piece for easy identification. The sheds are relatively easy to assemble, and the only tool needed in assembly for most models is a rubber hammer. The following instructions are specific to model number 3747, Rubbermaid Storage Horizontal large shed.
Select a level zone with the floor drain. A level area ensures roof and door hinges work properly. Check to make sure you have all the necessary parts. Slide left and pieces right again with a right. Fold the two sides to form 90 degree angles with the back. Slide the floor into place between the sides. The word “floor” should be up. Tap the ground securely in place with a rubber hammer.
12 Picture Gallery: How to Build a Rubber Maid Outdoor Shed
Take the door on the left, and align the hole in the top of the door with the pin on the side wall. Turn the door, and fit the pin in the bottom of the door into place in its corresponding hole in the floor. Repeat the last step of the right door to install the right door. Look for the guide formed in the right panel. Slide the roof support rod into the guide. Look for the turning point on the back. Slide back the cover at the pivot point.
This post topic: DOOR